trailer hitch swing

Fulton XP15 0101 Screw-in steel tilt jack with 10-inch travel and poly 8 wheels – 1500 lbs….
B0002UENOM
Fulton XP15 0101 Bolt Steel Tilt Jack, 10 Travel” and 8 Polyamide Wheels – 1500 lbs.
  • Capacity: £ 1,500
  • Stroke: 10 inches, storage length: 13 inches, extension length: 23 inches (measured from the center of the mounting plate to the bottom of the wheel)
  • Spacing: 12.4 inches (measured from the center of the mounting plate to the top of the socket)
  • Zinc-plated Z-MAX600 to prevent corrosion
  • 5 year limited warranty
CURT 13110 Class 3 Towbar, 2-inch Receiver, Select Ford Flex, Lincoln MKT, Black
B005GLXW7G
CURT 13110 Class 3 Towbar, 2-inch Receiver, Select Ford Flex, Lincoln MKT, Black
  • Reliable strength. This towbar is worth £ 4,000. The total weight of the trailer is 400 pounds. The tongue weighs 4000 pounds. Ability to distribute weight and 400 lbs. Drawbar for weight distribution (limited to the lowest traction factor)
  • Universal design. This Class 3 tow bar equips the vehicle with a standard 2 x 2 inch tow bar receiver for a variety of tow options. Can store ball joints, roof racks, bike racks, tow hooks, etc.
  • Completely checked. Each CURT Class 3 towbar design has been vehicle tested at a Detroit facility. Aftermarket couplings have been tested to the SAEJ684 standard for maximum transportation safety.
  • Rust, chipping and UV resistance. This towbar is protected by a unique double coating of rust-resistant liquid bonderite and a high-strength black powder coating. Both coatings cure together, providing excellent resistance to rust, peeling and UV rays.
  • Easy to install. This towbar is factory-fitted for some Ford Flex and Lincoln MKT models.
Choose CURT 13147 Class 3 tow bar, 2-inch receiver, Subaru Forester
B001EOYJSU
Choose CURT 13147 Class 3 tow bar, 2-inch receiver, Subaru Forester
  • Reliable strength. This towbar is worth £ 4,000. The total weight of the trailer and 400 lbs. Tongue weight (limited by minimal drag component)
  • Universal design. This Class 3 tow bar equips the vehicle with a standard 2 x 2 inch tow bar receiver for a variety of tow options. Can store ball joints, roof racks, bike racks, tow hooks, etc.
  • Completely checked. All CURT Class 3 towbar designs have been vehicle tested at Detroit facilities. Aftermarket couplings have been tested to the SAEJ684 standard for maximum safety in transit.
  • Rust, chipping and UV resistance. This towbar is protected by a unique double coating of rust-resistant liquid bonderite and a high-strength black powder coating. Both coatings cure together, providing excellent resistance to rust, peeling and UV rays.
  • Easy to install. This towbar provides a custom fit for selected Subaru Forester models.
CURT 11604 Class 1 Towbar, 1-1 / 4 inch Receiver, Honda Civic Select
B019E6XHTQ
CURT 11604 Class 1 Towbar, 1-1 / 4 inch Receiver, Honda Civic Select
  • Reliable strength. With a sturdy welded steel construction, this Class 1 drawbar is rated at £ 2,000. The total weight of the trailer and 200 lbs. Tongue weight (limited to the lowest rated traction factor)
  • High versatility. This Class 1 traction bar provides a convenient and versatile traction option for your vehicle. It has a standard 1-1 / 4 x 1-1 / 4” receiver hitch for towing small trailers and mounting luggage racks and bike racks.
  • Double layer finish. To ensure industry-leading rust, chipping and UV resistance both inside and outside, this retrofit coupling set is soaked in a bonderite liquid coating and cured with a permanent black powder coating.
  • Easy installation. This Class 1 Towbar is factory installed on some Honda Civic models.
  • I checked the security. All CURT Class 1 towbar designs have been rigorously tested using real vehicles under real conditions. Our couplings have been tested according to the SAEJ684 specification for road safety.
Fulton HDPB330101 3 x 3” screw-in foldable hinge set for side rails – 5000 lbs.
B001F0IE7A
Fulton HDPB330101 3 x 3” Screw-in Folding Hinge Kit for Side Rails – £ 5000.
  • Converts a standard trailer tongue into a collapsible configuration while retaining the existing trailer hitch
  • Precisely machined, sturdy die-cast steel hinges provide strength to pivot points
  • The trailer tab must be 3 x 3” on the outside and 0.188 to 0.120 thick.
  • Folding parts should only be attached to steel trailer tongues.
  • Easy screw installation with complete operating procedures and all assembly parts
Fulton Folding Welded Hinge Kit, 3 x 3” Trailer Bracket, Raw Finish, 5000 lbs.
B007V5BY8E
Fulton Folding Welded Hinge Kit, 3 x 3” Trailer Bracket, Raw Finish, 5000 lbs Power Rating
  • Finishing: Raw materials
  • Hook type: swivel mount
  • Compatible Vehicle Category: Trailer
  • Workload limit: £ 5000
  • Material: Steel
Swivel frame for mounting on trailer couplings
B00HZ403FG
Swivel frame for mounting on trailer couplings
  • Rotate 180 degrees for easy access to the rear of the vehicle
  • An ideal platform for tow bars, racks, or grills with 4 screws and a capacity of 250 lbs
  • Double safety device prevents accidental loosening while driving
  • High performance tube / rod construction is guaranteed for 10 years.
  • Available in 2-inch coupling models. Each includes a frame and a clutch tensioner.
CURT 18153 60 x 24 inch drawbar basket, 500 lbs, black steel, 2 inch foldable …
B00JF5LRN0
CURT 18153 60 x 24 inch basket coupling, capacity 500 lbs, black steel, 2 inch folding struts
  • Improved security. This trailer hitch road carrier protects your stuff while driving on the 6 inch side wall around the loading basket. Cargo nets or cargo bags can be attached to these walls.
  • Adaptable. This road coupling has a foldable curved strut. Thanks to the folding feature, the trunk can be folded when not in use, and the curved struts provide an additional ground clearance.
  • Easy to clean. Attached to the trailer coupling, this road carrier frees up cargo space inside the vehicle and cleans up dirty objects outside the vehicle. It also comes with a mesh base for easy cleaning of clutter.
  • Comprehensive security. This drawbar box with a reflector built into the frame ensures safe movement. Reflectors improve the visibility of trucks and vehicles.
  • Durable structure. This tow truck is made of steel pipe to ensure high strength and light weight. It’s worth £ 500. It is also E-Coat Black Powder Coating and Carbide Coating Black.
Folding 2-inch Goplus Wheelchair Adapter with Coupling Stem Mount – 500 lbs
>link
Folding 2-inch Goplus Wheelchair Adapter with Coupling Stem Mount – 500 lbs
  • [Load capacity of 500 lbs]This foldable adapter can hold up to 500 lbs. The durable material guarantees a long service life.
  • [Heavy Duty Steel]Made of heavy duty powder coated steel that is resistant to rust and corrosion.
  • [Foldable]The coupling adapter can be folded. The length after folding 90 degrees is 16 1/4 inch.
  • [For 2-inch trailer hitch]Work with a 2-inch x 2-inch trailer hitch.
  • We are confident that you will be impressed with the reliability and high quality of our trailer adapters.
MaxxHaul 70149 Jack with Twin Wheels 26-1 / 2 to 38” for Rear Swing Trailer – £ 1500.capacity
B008CE0FRO
MaxxHaul 70149 Jack with Twin Wheels 26-1 / 2 to 38” for Rear Swing Trailer – £ 1500.capacity
  • Capacity: £ 1,500
  • Wind: side
  • Double reverse wheel
  • Mounting bracket size – 6-1 / 2 W x 5-1 / 2” H.

Leave a Comment

Your email address will not be published. Required fields are marked *