hitch step

TGL hitch step, hitch for 2 inch receiver
B06XZLSFKT
TGL hitch step, hitch for 2 inch receiver

  • Sturdy steel structure

  • The comb provides non-slip traction for use as a step

  • The large central hole fits all 3-inch reinforced straps.

  • Powder coated mat surface for extra traction.

  • Works with a 2-inch receiver.
Bully BBS-1102 Black Bull Series High Performance High Performance Trailer Hitch SUV Trailer Hitch Crotch Protection…
B006PPM6BA
Bully BBS-1102 Black Bull Series High Performance Trailer Hitch for Robust Trailer Hitch SUV Trailer Universal Trailer for Hitch Truck Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep

  • Widely used to facilitate access to the truck body, overhead bins, or the rear of the vehicle hold. The clutch step also protects the bumper and protects it from damage from light impacts from behind.

  • Robust construction: The robust coupling stage is made of 16 gauge steel to withstand extreme loads. Non-slip, impact-resistant rubber footrests increase the overall robustness of the step.

  • Easy to install: Plug and Play makes it quick and easy to install. After installation, Universal Step Rubber Pads provide a lasting, safe and comfortable stand.

  • Universal Fit: The Universal Bumper Guard is designed for the standard 2 inch. Coupling device. This bumper protection fits the most common attachments.

  • Technical data: 18 inch access step. It is wide and the diameter of the pipe is 3 inches. The rugged design makes the footrest ideal for sports cars and SUVs.
Structured black powder coated dominator universal coupling for Go Rhino D360T 2 inch receiver
B00SB3HLQ4
Structured black powder coated dominator universal coupling for Go Rhino D360T 2 inch receiver

  • Includes non-slip device and practical black storage bag.

  • The new perforated aluminum profile matches the current dominator profile

  • Easy access to hard-to-reach storage areas and double-step shelves

  • Made from high quality steel for unmatched strength and durability.

  • Black structured powder coating with a 5-year warranty.
Eapele towing platform for 2 inch receivers, robust and rustproof powder coated steel construction, …
B083HWP5PB
Eapele towbar foot for 2-inch receiver, sturdy, rust-proof powder-coated steel construction, 10,000-lb tension strap

  • Versatility – The Eapele Hitch Bumper Step uses the vehicle’s rear hitch receiver to facilitate entry and exit to the rear of the vehicle. This step also has the added benefit of acting as a traction point for attaching durable traction straps.

  • It works with two square receiver-2″ ports. The kit also includes pins that can be used to prevent slipping.

  • Powder coated solid steel – A highly durable tow strap weighing 10,000 lbs. Powder coated steel is weather resistant and durable and should last for years. The comb provides a safe stand and a non-slip surface.

  • Two different working heights – the steps can be turned upside down for use at different heights. This is very useful if you are concerned about falling on uneven roads with low steps, or if you need high steps to access the roof of your cargo space …

  • Tip: On some vehicles, the towbar may loosen, which can cause a slight rattling noise. You can add tape to prevent movement.
Tyger Auto TG-HS8U81238 Towbar Compatible with cars with 2 inch towbar receivers | Structured…
B0786SGH33
Tyger Auto TG-HS8U81238 Towbar Compatible with cars with 2 inch towbar receiver | Textured Black | Hitch Step | Rear Bumper Cover | With Pin Lock and Stabilizer

  • TYGER’s patented trailer coupling provides easy access to storage areas. The double carrier system provides maximum collision protection at the rear.

  • Only suitable for 2-inch mounting. Load capacity: 350 lbs. Easy installation. The kit includes a free pen holder and stabilizer.

  • Durable 2 inch diameter, 0.120 inch wall thickness. Two-step powder-coated black texture finish.

  • In rare cases, this can affect the operation of the backup sensor.

  • Limited lifetime warranty against TYGER manufacturing defects!
Eapele hitch stage for 2-inch receiver, sturdy steel construction, anti-corrosion powder coating, and …
B083HYGWDM
Eapele hitch stage for 2-inch receiver, durable, rustproof, powder coated steel construction with coupling pins, maximum load 400 lbs.

  • Functionality – The Eapele Hitch Step uses the vehicle’s tow bar receiver to make the rear lift and exit of the vehicle more comfortable and improve rear access to the truck’s body or pillars.

  • Suitable for two receiver-2″ square plugs. Dimensions: 15.3 inches (length) x 10.5 inches (width) x 2.5 inches (height). Includes coupling pins and clips that can be used to prevent slippage.

  • Powder coated solid steel – Very sturdy 8GA steel with a maximum load of 400 lbs. Powder coating for weather resistance and durability should last for years.

  • Non-slip plastic cover. Square steel construction with plastic cover protects from scratches. The Ridges plastic cover also provides a firm hold and a non-slip surface.

  • Tip: On some vehicles, the towbar may loosen, which can cause a slight rattling noise. You can add rubber inserts or tape to prevent movement.
Rear Clutch Receiver with TAC Aluminum Hitch Pitch Universal Fit 2 6″ Cutout
B079F1SRFP
Rear Clutch Receiver with TAC Aluminum Hitch Pitch Universal Fit 2 6″ Cutout

  • Innovative Design – Gives your car a unique and outstanding functional look.

  • Wide Step Area – A huge 7.3 x 26″ long 6 drop zone that provides safe, comfortable and non-slip access to RVs, roof racks and track beds.

  • Surface finish – Light texture, matte finish, excellent resistance to rust and corrosion. High quality UV resistance.

  • Equipment-Universal fits a 2-inch link receiver. Includes coupling pins and clamps.

  • Warranty-TAC 3-year warranty against manufacturing defects!
WeatherTech81BS1 McNeill Automotive Bump Stop
B00HG2UEBA
WeatherTech81BS1 McNeill Automotive Bump Stop

  • Weather Tech

  • 81Bs1

  • Made in USA
DNA MOTORING HITST-2-333-BK Hitst Class III 2 Receiver Tag Footrest, Black
>link
DNA MOTORING HITST-2-333-BK Hitst Class III 2 Receiver Tag Footrest, Black

  • Robust, fully welded construction and construction for maximum strength and safety

  • Can withstand road abuse and towing under harsh conditions with specified capacity

  • Includes screw-in assembly / diagonal edges / instructions

  • 2.25 Square bar / 2 inch receiver fit / 32.5 inch long bar / 350 lbs load capacity

  • Non-slip stainless steel profile plate
Sideboard CargoLoc Trailer Coupling
B01NA9KEPB
Sideboard CargoLoc Trailer Coupling

  • Rugged and weather resistant steel structure

  • Suitable for all 2 inch trailer hitch receivers

  • Up to 300 lbs capacity (136 kg)

  • No easy installation or assembly required

Leave a Comment

Your email address will not be published. Required fields are marked *